Viva LED Flexible Strip Lighting
QUICKCODE : 16044
- Self-adhesive 3M tape backing allows for quick and simple installation.
- Male and female ends on the strip allow you to create the length required.
- The strip can be cut to length; scissor marks on the product mark where it's suitable to cut.
- Re-use a cut section of the strip ONCE using the mini-cut connector.
- Extremely low energy consumption, only 5W per 2000mm.
- Use this product for a variety of applications (on the plinth, above cabinets to up-light the ceiling, below the worktop on a handleless kitchen to name a few).
- All you need to install is an adequate amount of flexible strips, driver connection lead(s) – one per run of strips and a LED driver.
- Run a maximum length of 12m from one driver (based on using the 30W driver).
- Dimmable with Sensio dimmer switches/controls
- IP54 rated - Limited ingress of dust permitted (no harmful deposit) and protected against sprays from any angle, e.g. splashes of water
Write Your Own Review