Zenith sink cut out service
QUICKCODE : 15884
When it comes to installing sinks with Zenith solid laminate worktops there are no limitations due to its 100% waterproof properties, so both inset and under mount sink types can be used.
At Savoy Timber we professionally cut out for over and under mount sinks using a commercial CNC machine. We require detailed measurement specifications and/ or a template if possible. We will then cut to these measurements or template. We require this to be submitted via email.
Cut-outs for overmounted sinks and undermount sinks can be routed to any size. We simply require the sink dimensions in order to create a made-to-measure cut out.
Once received we will contact you to confirm your requirement.
Please note if you are located outside Savoy Timber Home Delivery areas we will leave the cut out attached in two small sections that can be cut with a jigsaw or router on site to complete the cut out.
This is to ensure the rigidity of the product whilst in transit.
Once your worktop has been delivered, we recommend sealing the exposed edge and the rim of the sink with a silicone sealant.
Once we have completed the fabrication work the worktop is non -returnable
If installing Belfast / Butler sinks please refer to manufacture guidelines to ensure you follow the correct method to ensure the sink is sufficiently supported underneath. They also need sealing with a good quality silicone sealant, this is applied to the top of the Belfast sink and Zenith lowered into place, any squeeze out must remove at this point and made good.
|Lead Time||Up to 4 Weeks|